Eight Installation Positions 1 Inch Silt Soil / Solid Small Electric Slurry Pump
Specifications
| Pump Model | 1.5 / 1B - |
| Allowable Max Power | 15 Kw |
| Capacity | 12.6 - 28.8 m³ / h |
| Head H | 6 - 68 |
| Speed | 1200 - 3800 |
| Max . Eff . | 40 % |
| NPSH | 2 - 4 |
| Impeller . Dia . | 152 |
Introduction
Equivalent/identical/similar to WAR-MAN 1.5/1B- slurry pump, all the spare parts are interchangeable/replaceable. The maximum mating power for this pump is 15Kw.
Slurry pump SH series it is heavy and powerful centrifugal installation, capable of pumping viscous and abrasive media.
Horizontal Slurry pump with a suction pipe. Pump parts are subject to a minimum abrasion during use, resistant to shocks and high pressure water. Do not create a big noise at work, do not vibrate. Protected against leakage of liquid.
The discharge connection may be arranged at intervals of 45 degrees on demand and in any direction of the 8 position for easier installation and use.
Features
A Type , M, HH Pump are cantilevered, horizontal, centrifugal slurry pump.
B They are designed for the handing high density slurries in the metallurgical, mining , coal, power,
building material and other industrial department etc.
C The pump of this type also maybe installed in multistage series.
D The frame plates liner and impeller for type , M pumps have replaceable wear-resistant metal liners
or rubber liners,
E The shaft seals Type: Gland seal , Expeller Seal , mechanical Seal
F Discharge branch can be positioned at intervals of 45 degrees
Centrifugal slurry pump impeller maintenance and repairing
The centrifugal pump will be gradually worn and corroded by the sediment, the water flow, and the corrosion of the medium. The surface of the leaves often forms grooves or strips, or is damaged by cavitation, and the leaves appear honeycomb-like holes or even perforations. If the blade is cast with stomata, sandholes, or slag, the surface after operation is prone to stomata and even cracks.
There are many methods for repairing the impeller of the water pump. There are many methods for repairing the impeller's cavitation, such as using ARC polymer composite materials, powder spraying(welding), epoxy resin coating, rubber and nylon composite material repair, etc.. Stainless steel inlaying, surfacing and so on. The epoxy resin polymer coating has the advantages of simple, low price and good effect.
By optimizing the ratio, the performance indexes of the material are adjusted in a targeted way, and the toughness of high strength adhesion relay and absorption of impact energy is shown. It has high strength and hardness against cavitation, abrasion and damage.
Shaft Seal Module Design
Product Tags:
|
|
Eight Installation Positions 1 Inch Silt Soil / Solid Small Electric Slurry Pump Images
|
